Toshiba Tecra 510CDT User Manual Download Page 52

Page: 52 / 263

Getting Started

Turning on the computer

5.375 x 8.375 ver 2.3

Turning on the power

To turn on the computer:

Make sure any external devices (such as the AC adapter,
if you plan to use AC power rather than battery power)
are properly connected and ready.

Check to ensure that any diskette drives are empty.

Press and hold the power button in until the on/off light
on the system indicator panel glows green—about one
second.

Sample turning on the power

The preinstalled operating system will load automatically.

When you turn on the computer for the first time, do not turn
off the power again until the operating system has loaded
completely.

Summary of Contents for Tecra 510CDT








































































































































































































































































Search results

Summary of Contents for Tecra 510CDT

Reviews:

Related manuals for Tecra 510CDT

Brands by name

Popular brands

Toshiba Tecra 510CDT, User Manual

Search results

Summary of Contents for Tecra 510CDT

Reviews:

Related manuals for Tecra 510CDT

Brands by name

Popular brands