manualshive.com logo in svg

Toshiba Tecra 510CDT, User Manual

Share
Download
Toshiba Tecra 510CDT User Manual Download Page 104

104

Learning the Basics

Using the DVD-ROM or multi-function drive

5.375 x 8.375 ver 2.3

Do not press the Eject button or turn off the computer while the 
Drive in-use indicator light is glowing. Doing so could 
damage the disc or the drive. 

When the disc tray is open, be careful not to touch the lens or 
the area around it. Doing so could cause the drive to 
malfunction.

Manual eject hole—Releases the disc tray when the power is 
off. Use a straightened paper clip or other narrow object to 
press the manual eject button located inside the hole.

Never use a pencil to press the Eject button. Pencil lead can 
break off inside the computer and damage it.

Inserting a compact disc 

To insert a compact disc into the DVD-ROM or multi-
function drive:

1

Make sure the computer is turned on.

2

Make sure the in-use indicator light is off.

3

Press the DVD-ROM or multi-function drive’s eject 
button.

The disc tray slides partially out of the drive (about 1 inch).

Summary of Contents for Tecra 510CDT








































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands