- 56 -
[Fine adjustment of stop position of the strip issue]
Printing in strip issue mode for the auto labeler, stops at the
position where the distance from the middle point of the gap
between labels to the end of the strip shaft is 4 mm, since the
gap between labels is assumed to be 2 mm.
When the print stop position is not proper due to a greater gap,
the print stop position should be changed by using the fine
adjustment of the stop position of the strip issue.
+0.0 mm
+3.0 mm
- 3.0 mm
Paper feed direction
Stop position of the strip issue (End of the strip shaft)
Stop position of the strip issue (End of the strip shaft)
Stop position of the strip issue (End of the strip shaft)
2 mm
4 mm
3 mm