- 33 -
7.2.3
Self-test Results Printout Samples
(1) Maintenance counter/Various parameters printout
NOTE:
Print conditions: 170 mm of label length,
thermal transfer/direct thermal print mode
(*1)
,
no sensor used, 4”/sec, one sheet to print, batch issue
(*1) Depends on the print type setting.
TOTAL FEED 1.1km
FEED 1.1km
PRINT 0.5km
CUT 96
RIBBON 3h
232C ERR 255
SYSTEM ERR 0
POWER FAIL 0
[PC] [KEY]
FEED +2.0mm FEED +0.0mm
CUT +0.0mm CUT +1.0mm
BACK +0.0mm BACK +0.0mm
TONE(T) +0step TONE(T) +0step
TONE(D) +0step TONE(D) +0step
RBN(FW) -10 RBN(FW) -8
RBN(BK) +0 RBN(BK) +0
X ADJ. +0.0mm
THRESHOLD(R) 1.0V
THRESHOLD(T) 1.4V
FONT [PC-850] [0]
CODE [AUTO]
SPEED [9600]
DATA LENG. [8]
PARITY [EVEN]
CONTROL [XON+READY AUTO]
MESSAGE [ENGLISH]
FORWARD WAIT [ON] +0.0mm
FEED KEY [FEED]
KANJI [TYPE1]
EURO CODE [B0]
AUTO HD CHK [OFF]
WEB PRINTER [OFF]
SILENT PRINT [ON]
KB80 CONNECT [OFF]
PRTR IP ADDR [192.168.010.020]
GATE IP ADDR [000.000.000.000]
SUBNET MASK [255.255.255.000]
TTF AREA [640KB]
EXT CHR AREA [128KB]
BASIC AREA [ 64KB]
PC SAVE AREA [ 64KB]
PCL EMULATION [ON]
PRINT SPEED [4”/s]
SENSOR [TRANS.]
PRINT TYPE [TRANSFER]
TYPE [NO CUT]
MEDIA [USER 2100x2970]
SOCKET PORT [OFF][08000]
BASIC [OFF]
BASIC TRACE [OFF]
