Toshiba TDP-MT500, Owner'S Manual

Page: 23 / 42

23
VIEWING VIDEO IMAGES
On setting ASPECT (Image angle)
This projector can change ASPECT ratio (The ratio between width and length of image frame) according
to input video signals.
POWER ON/OFF
C1 C2
DVI
D
DVI
A
S V
COMP1 COMP2 DVI-D
DVI-A VIDEO S-VIDEO
16:9
16:9 4:3
4:3 ZOOM
ZM
REAL
REAL
DYN
DYNAMIC
1
2 3
ASPECT button
SOURCE
ASPECT
Original video
image
Projects video
images on full
screen (16: 9). Projects video
images at a
ratio of 4: 3.
Projects video
images of
input signals
as they are.
Projects 4-to-3
signals by
expanding them
to 16-to-9 images
on full screen
(Nonlinear).
Projects video
images of
cinemascope
and vista size
together with the
caption.
*or
( ): name of remote controller button
Bold frames are recommended modes.
* In zoom mode, it is possible to switch between display sizes (cinemascope/vista) with ZOOM button.
In cinemascope mode, it is possible to shift the display position with
{
,
}
buttons.
16 : 9
4 : 3 ZOOM REAL
DYNAMIC
Picture images
with a ratio of 4: 3
(480i, 576i, 480p,
576p, and PC)
Cinemascope
and vista signals
with a ratio of 4: 3
Projected images
expand in
horizontal direction.
PC inputs not less
than SVGA are
projected on full
screen (16: 9).
Squeezed 4-to-
3 images
(480i, 576i,
480p, 576p)
16-to-9 images
(1080i)
16-to-9 images
(720p)
Projected images
are compressed to
the full screen size.
Horizontal and
vertical size of the
projected images are
reduced to a half.
DISPLAY...
4:3
ZOOM
DYNAMIC
REAL
16:9
ASPECT
How to change the settings:
With the remote controller:
1. Press an ASPECT button (16: 9, 4 : 3, ZOOM, or DYNAMIC).
With the operation panel of the projector.
(Refer to Page 25 for the method of setting the menu.)
1. Reveal the signal setting menu.
2. Select “Image angle” by pressing
{
,
}
buttons.
3. Press ENTER button.
4. Select a desired image angle by pressing
{
,
}
buttons.
5. Press ENTER button.
When canceling the menu:
6. Press MENU button.