Toshiba TDP-ET10 Owner'S Manual Download Page 53

Page: 53 / 59

Others

Trouble indications

The indicator lights inform you of internal abnormalities.

LED indicators

State/Problems

No LED lit

No power

⇒

Problem with projector

• Unplug the power cord, and contact your dealer.

⇒

The lamp cover is not properly attached.

• Unplug the power cord, and reattach the lamp cover.

Red LED is ﬂ ashing at ON/
STANDBY indicator (2Hz)

Power went out during use

⇒

Internal overheating, or the outside temperature is too high.

• Place the projector so that the air intake and exhaust are not

blocked.

• Unplug the power cord and wait for a short while, then turn

the power back on.

❈

The icon will appear before the power goes out.

❈

After approx. one minute of abnormal display, the projector

returns to the standby state waiting for internal cool down.

Red LED is ﬂ ashing at ON/
STANDBY indicator (5Hz)

Power went out during use

⇒

Problem with internal cooling fan.

• Unplug the power cord, and contact your dealer.

❈

The icon will appear before the power goes out.

❈

After approx. one minute of abnormal display, the projector

returns to the standby state waiting for internal cool down.

Red LED lit at ON/STAND-
BY indicator

Power went out during use, or won’t come on

⇒

Lamp temperature is high so that it is difﬁ cult to turn on,

the lifetime of the lamp has ended or the projector is
malfunctioning.

• Unplug the power cord and wait for a short while, then turn

the power back on.

• If a lamp burns out, replace it with a new one.

❈

After approx. one minute of abnormal display, the projector

returns to the standby state waiting for internal cool down.

Summary of Contents for TDP-ET10




























































Search results

Summary of Contents for TDP-ET10

Reviews:

Related manuals for TDP-ET10

Brands by name

Popular brands

Toshiba TDP-ET10, Owner'S Manual

Search results

Summary of Contents for TDP-ET10

Reviews:

Related manuals for TDP-ET10

Brands by name

Popular brands