Toshiba TDP-ET10 Owner'S Manual Download Page 51

Page: 51 / 59

Maintenance

Install the new lamp.

Insert the new lamp into position and lock it
into place with the three lamp locking screws.

Replace the lamp cover.

Align the cover, and press it in, then tighten the
screws loosened in step 4 until the lamp cover
is no longer loose.

Reset the lamp timer.

Reset the lamp timer by using “lamp timer
reset” in Setup menu.

p.46

■

Notes and Precautions

• The

Lamp time

item in the

Status display

menu indicates the “estimated” time of lamp

use.

p.47

• Attach the lamp cover so that it is not loose. If it is not attached correctly, the projector

and/or lamp may not work correctly.

• When replacing the lamp, always use a new lamp.
• The lamp is made out of glass and is fragile. Do not touch the lamp your bare ﬁ ngers.

Handle the lamp with a wrap or gloves. Do not drop or shake the lamp. Doing so may
cause damage to the lamp.

■

Lamp Environmental Safety

This projector’s lamp contains trace amounts of environmentally harmful inorganic
mercury.
Be careful not to break new or used lamps. Dispose of used lamps in accordance with lo-
cal regulations.

Summary of Contents for TDP-ET10




























































Search results

Summary of Contents for TDP-ET10

Reviews:

Related manuals for TDP-ET10

Brands by name

Popular brands

Toshiba TDP-ET10, Owner'S Manual

Search results

Summary of Contents for TDP-ET10

Reviews:

Related manuals for TDP-ET10

Brands by name

Popular brands