4
Attention
z
To avoid malfunction or breakage to the iron
Do not apply too much force to the handle.
It may cause breakage.
Do not iron hard things, such as buttons or fasteners.
It may cause damage.
Do not touch the soleplate against the surface of the
stand or the case.
It may cause deformation or damage. (See page 6)
Do not pour water on the surface of the stand or the
case.
It may cause malfunctions.
Do not use the iron for industrial ironing.
Overloading may cause malfunctions.
Do not use commercial soleplate attachments
(soleplate covers).
It may cause malfunctions.
Do not do the clothes just after the dehydration for an
iron.
The evaporated water could get into the iron and cause a mal-
function.
Do not put in any liquid except tap water (no linen
water, scented water, or water that has been kept in an
empty juice container, etc.).
It may cause malfunctions or stain clothing.
Do not leave the case in direct sunlight.
It may cause cracks or discoloration.
The iron is charged from the stand. Always leave it on
the stand when you are not using it.
Use the specified stand.
Only the power cord provided can be used with this
iron. Be careful that it is not lost while being used or
stored.
If it is lost or damaged, contact the store from which the product was purchased.
Do not wind the power cord around the iron or the
case, or do not store it in the case.
z
To avoid staining or damaging to clothes
For high quality or special clothing, test the iron in a
place that is inconspicuous.
Be particularly careful with velvet, acrylic, nylon, cashmere, etc.
Use a press cloth to avoid making a cloth shiny.
Do not use the iron for leather goods.
It may damage the clothing.
For coats and shaggy clothes, hold the soleplate away
from them when doing shots.
It may damage the clothing.
Be sure to use a patch cloth if you glue an applique or
an adhesion core together.
Set the temperature to [HIGH], set the Steam / Dry lever to [ Dry],
and be sure to use an ironing cover. If a manual is attached, please
follow it.
Use silicon type spray starch, and finish with [Dry iron].
If you use starch that does not contain silicon, it will stick to the
soleplate and turn brown and the iron will not slide easily. Clean
the soleplate.
Starch on the soleplate may stain clothing.
