12
Cleaning the iron
Attention
z
z
Always unplug the power plug from the electrical outlet, and allow the iron to cool completely.
Dirt on the iron and stand
Use a soft dry cloth or a damp cloth to wipe the iron and stand.
Dirt on the contact pins
Wipe with a dry
cloth.
Contact pins
Dirt on the soleplate
After using spray starch, wipe the soleplate with a damp cloth.
Plugged steam vents
Use a needle or pin to remove any foreign matter from the steam vents, and wipe the soleplate with a damp cloth. Then,
do several shots over a piece of cloth you do not need.
Steam vents
When steam does not readily come out
1
Check the water level in the water tank
z
z
If there is not enough water, refill the water tank up to the
full mark.
Up to this line
2
Hold the iron horizontally, put the Steam / Dry lever in the [
Steam] or the [
Shower] position, then press the Shot
button
several times to do shots.
Clean the soleplate if steam does not come
out.
or
