English
5
Getting ready to use the iron
1
Remove the case
Hold the open buttons on both
sides of the case, pull them both
outward ( ) as the arrows show,
and then lift up ( ).
①
①
②
②
2
Put water (add more water)
If you are using the iron for dry ironing, you do not
need to put water.
1
Put the Steam / Dry lever in the [
Dry] position, and
remove the water tank. (See page 6)
2
Put tap water up to the full mark.
3
Close the lid of the fill opening and put the water tank on
the iron.
Up to this line
3
Turn on the
power
Plug the stand side power plug
to the stand and the power
supply side plug to electrical
outlet.
Insert plugs all
the way!
Attention
z
z
Dirt on the soleplate may stain clothing. Clean the soleplate before using the iron.
z
z
When carrying the water tank, set the Steam / Dry lever to [
Dry], and hold the fill opening up. (Causes water leaks.)
z
z
Wipe water off if it adheres anywhere other than the fill opening.
z
z
Do not put water past the full mark. Steam will come out of the iron when it is placed on the stand.
z
z
Do not put the case on while the power plug is plugged into an electrical outlet.
Useful functions
Auto power off function (in case you forget)
If you leave the iron on the stand for more than about 10 minutes, the power is automatically turned [OFF]
(temperature lamp turns off).
To restart the power
Press the SET / OFF button and set the temperature according to the fabric you are
ironing.
