Installation
Step 9: Configure Stratagy Admin Software
18
Stratagy IVP8 Installation Guide 01/02
Step 9: Configure Stratagy Admin Software
Settings for the communication port in Stratagy Admin must match the corresponding parameters
set in the Stratagy System Configuration file on the Stratagy IVP8.
For example, the Stratagy Admin PC serial port settings made in the Serial Port field of this
procedure must be identical to the serial port definitions (i.e., set serial_port) set in the
Stratagy IVP8’s System Configuration file (see
“Stratagy System Configuration”
on
page 24
).
Note
The menu screens detailed in this section are only available with Stratagy Admin version
VSA.2G or later.
➤
To configure Stratagy Admin software
1. From the
C:\ADMIN3
DOS prompt, type
admin
and press
Enter
. The Stratagy Admin
screen displays.
2. From the Stratagy Admin
Main screen, press
2
or
highlight the Configure
Admin option and press
Enter
. The Admin PC
Configuration screen
displays (shown right).
Note
Press
F1
for help with
any settings in the
Stratagy Admin Configuration screen.
3. Make any changes needed. See
Table 2
on
page 19
for a description of each of the fields.
Note
Press
F2
in the Serial Port and Baud Rate fields to display a pop-up box with valid entries.
4. To save your changes, you must have the cursor in the last field (i.e., Modem Init String), and
press
Enter
or the arrow down (
↓
) key
...or to exit without saving your changes, press
Esc
at any time.
The program returns to the Stratagy Admin Main screen.
3230
Summary of Contents for Stratagy IVP8
Page 1: ...Installation Guide Stratagy IVP8 ...
Page 59: ......
