Maintenance
Shut Down the LVMU
24
LVMU Installation Guide 03/06
Shutdown Using the Telephone Dial Pad Method
Important!
System shutdown using the telephone dial pad is not operable if UAdmin is
connected.
To enable shutdown procedure and change mailbox 983 security code
Important!
It is extremely important that the security code for mailbox 983 be changed. If the
security code is not changed, it is possible for someone who knows the LVMU’s
default password scheme to call into the system and shut it down.
1.
Using UAdmin, log on to the LVMU. The UAdmin Main Menu displays.
2.
Press
Alt+U
. The Users Menu, Options screen displays.
3.
In the
User ID
field, type
983
and press
Enter
. The Options screen displays for box 983.
4.
Using the arrow down key, place the cursor in the
Security Code
field.
5.
Type the new security code.
Note
For added security, the security code does not appear on the screen as you type it.
6.
Navigate to the
Do Not Disturb
field.
7.
Press the spacebar to change the field from On to Off.
Note
Changing the Do Not Disturb option enables the token programming residing in the
Extension
field of the mailbox. It is the token string in this mailbox that performs the
shutdown procedure.
8.
Press
Alt+S
to save the changes.
To shut down the LVMU using the telephone dial pad
1.
From the telephone dial pad, call the LVMU. Once you dial into the LVMU, the system answers
with the enter your security code greeting. Press # to bypass. The LVMU prompts you to enter
the User ID.
2.
Enter
983
. The LVMU prompts you to enter the security code.
Important!
You must wait until the entire prompt has been played before entering the security
code. If the code is entered prior to the completion of the prompt, the shutdown does
not occur.
3.
Enter the new security code (the default is
983997
) and press
#
. All inactive channels are
taken off-hook. All active channels are given a 60 second time delay to complete processing
the current activity. After 60 seconds, they are disconnected and the system shuts down.
Note
The LVMU is completely shut down when the status light is Out and all port LEDs are On.
Important!
For security reasons, you should change the default security code.
Shutdown Using UAdmin’s Main Menu
1.
From UAdmin’s Main Menu, select Shutdown by pressing
Alt
+
s
. The LVMU asks for the
password.
2.
Enter the password (the default is
Stratagy
) and press
Enter
. The screen enables you to
select one of the following options:
•
Shutdown and Restart CURRENT Version — Restarts the LVMU.
•
Shutdown and Trace CURRENT Version — Shuts down, then restarts LVMU in the TRACE
mode (TRACE.OUT file is created) on the LVMU’s flash drive.
