Installation
Telephone System Configuration
10
LVMU Installation Guide 03/06
Telephone System Configuration
This function modifies the following codes/integration patterns:
•
Telephone System Dial Codes – The LVMU performs certain actions on your telephone system
by using defined telephone system dial codes. To define the dial codes, you must modify the
telephone system dial code parameters.
•
System Integration Patterns – Enables modification to the telephone system integration
patterns.
Note
The telephone system configuration is set using the
pbx_type
parameter (see Stratagy
Installation & Maintenance manual on OPGONLINE for details).
If your system is to be configured for system dial codes or system integration patterns, you should
edit them now. As an example:
.
CAUTION! In most cases the default codes need not be changed. Take care when making
changes and then restarting the LVMU. In some cases, if invalid information
has been entered, The LVMU may not reboot correctly.
Stratagy System Configuration
Use this function to change the LVMU’s system options and parameters. Most Stratagy System
Configuration options
do not
require modification.
We recommend that you modify the system password immediately. All other options have default
values, but can be modified as required.
Configure the LVMU Software
1.
From the Tools menu, press
6
. The system configuration file displays. The parameters are
listed in alphabetical order.
2.
Make changes to the parameters. See the Stratagy Installation & Maintenance manual for
instructions on changing the parameters.
3.
Press
ESC
.
4.
From the Stratagy System Config screen, press
1.
The changes are transmitted to the LVMU
and the LVMU is shut down and restarted. By shutting down and restarting the LVMU, the
changes take effect.
...or
2
. The changes are transmitted to the LVMU but the LVMU is not shut down or restarted.
Until you restart the LVMU, the changes do not take effect.
...or
3
. The changes you made are cancelled and not saved.
If your Toshiba telephone system is configured for tone first, you would:
Press
1
to Edit System Dial Codes.
From the Telephone System Dial Codes screen, delete the suffix –
1
from the line
What
to
dial AFTER dialing the User ID extension
.
Press
Esc
.
Press
1
to save your changes, and restart the LVMU
