Installation
LVMU Playback Audio Level Adjustment
12
LVMU Installation Guide 03/06
LVMU Playback Audio Level Adjustment
Customers may experience lower LVMU1A playback audio levels when internally calling from one
model / style of Toshiba phone (e.g. IPT phones) than other Toshiba phones. The following
procedure describes how to create PAD levels and adjust the LVMU1A voice playback levels
between various model phones or extensions, using the CIX pad table in eManager.
Preparation in advance:
1.
Ensure your eManager version is V4.20 A09.
2.
Make a note of the DN numbers assigned to the LVMU1A.
These DN numbers are available in station assignment window.
3.
Make sure the equipment number shows the slot number the LVMU1A is programmed into.
4.
Use eManager to find an idle PAD group number by the following operation.
•
Go to
Advanced Configuration
>
System
>
PAD Table
then click on
PAD Group – Table View
.
You will see following window.
This procedure uses PAD group 1 as am example. Use a PAD group for the LVMU1A that has not
been assigned for other use.
5.
Close PAD group table window.
6.
Assign PAD group for each VM port. Select
Station
from pad group device type drop down list
7.
Enter the Prime DN number of the VM port that you noted in
.
8.
Select PAD group number from the Pad Group Number drop down list.
9.
Click on the
Submit
button.
10. Assign the PAD group for all LVMU1A ports.
You can see the completed PAD group setting in PAD group table of view window.
