background image

Safety Summary 

EO1-12029 

 

(ii) 

If foreign objects (metal 
fragments, water, liquids) enter 
the machines, first turn off the 
power switches and disconnect 
the power cord plugs from the 
outlet, and then contact your 
authorized TOSHIBA TEC 
representative for assistance.  
Continued use of the machine in 
that condition may cause fire or 
electric shock

 

When unplugging the power cords, 
be sure to hold and pull on the plug 
portion.  Pulling on the cord portion 
may cut or expose the internal wires 
and cause fire or electric shock

 

Ensure that the equipment is 
properly grounded.  Extension 
cables should also be grounded.  
Fire or electric shock could 
occur on improperly grounded 
equipment. 

 

Do not remove covers, repair or 
modify the machine by yourself.  
You may be injured by high 
voltage, very hot parts or sharp 
edges inside the machine.  
Unauthorized modification is 
prohibited.

 

 

 
 

This indicates that there is the risk of personal Injury or damage to objects if 
the machines are improperly handled contrary to this indication. 

3UHFDXWLRQV
The following precautions will help to ensure that this machine will continue to function correctly. 

 

Try to avoid locations that have the following adverse conditions: 

 

*  Temperatures out of the specification 

*  Direct sunlight 

*  High humidity 

 

*  Shared power source 

*  Excessive vibration 

*  Dust/Gas 

 

Do not subject the machine to sudden shocks. 

 

Do not press the keys too hard. Keys will operate correctly if they are touched lightly. 

 

Clean the cover and keyboard, etc. by wiping with a dry cloth or a cloth soaked with detergent and 
wrung out thoroughly. Never use thinner or other volatile solvent for cleaning. 

 

At the end of the day, turn the power OFF, then clean and inspect the exterior of the machine. 

 

Try to avoid using this equipment on the same power supply as high voltage equipment or equipment 
likely to cause mains interference. 

 

USE ONLY TOSHIBA TEC SPECIFIED consumables. 

 

DO NOT STORE the consumables where they might be exposed to direct sunlight, high temperatures, high 
humidity, dust, or gas. 

 

When moving the machine, take hold of the drawer and lift the machine. 

 

Do not place heavy objects on top of the machines, as these items may become unbalanced and fall 
causing injury

 

Do not block the ventilation slits of the machines, as this will cause heat to build up inside the 
machines and may cause fire

 

Do not lean against the machine.  It may fall on you and could cause injury

 

Place the machine on a stable and level surface. 

 

5HTXHVW 5HJDUGLQJ 0DLQWHQDQFH

 

Utilize our maintenance services. 

 

After purchasing the machine, contact your authorized TOSHIBA TEC representative for assistance 
once a year to have the inside of the machine cleaned. Otherwise, dust will build up inside the 
machines and may cause a fire or a malfunction. Cleaning is particularly effective before humid rainy 
seasons. 

 

Our preventive maintenance service performs the periodic checks and other work required to maintain 
the quality and performance of the machines, preventing accidents beforehand. 

 

For details, please consult your authorized TOSHIBA TEC representative for assistance. 

 

Using insecticides and other chemicals 

 

Do not expose the machines to insecticides or other volatile solvents.  This will cause the cabinet or 
other parts to deteriorate or cause the paint to peel.

 

 

 

&$87,21

 

 

'LVFRQQHFW

WKH SOXJ

 

&RQQHFW D

JURXQGLQJ ZLUH

 

'LVFRQQHFW

WKH SOXJ

 

1R

GLVDVVHPEOLQJ

 

 

 

 

Summary of Contents for ST-7000 Series

















Reviews: