background image

Safety Summary 

EO1-12029 

 

(i) 

6DIHW\6XPPDU\

 
Personal safety in handling or maintaining the equipment is extremely important.  Warnings and Cautions 
necessary for safe handling are included in this manual.  All warnings and cautions contained in this manual 
should be read and understood before handling or maintaining the equipment.  
Do not attempt to effect repairs or modifications to this equipment.  If a fault occurs that cannot be rectified 
using the procedures described in this manual, turn off the power, unplug the machine, then contact your 
authorized TOSHIBA TEC representative for assistance. 
 

0HDQLQJVRI(DFK6\PERO

 

This symbol indicates warning items (including cautions). 
Specific warning contents are drawn inside the   symbol. 
(The symbol on the left indicates a general caution.) 
 
This symbol indicates prohibited actions (prohibited items). 
Specific prohibited contents are drawn inside or near the   symbol. 
(The symbol on the left indicates “no disassembling”.) 
 
This symbol indicates actions which must be performed. 
Specific instructions are drawn inside or near the 

 symbol. 

 (The symbol on the left indicates “disconnect the power cord plug from the outlet”.) 

 

This indicates that there is the risk of death or serious injury if the 
machines are improperly handled contrary to this indication. 

Do not plug in or unplug the 
power cord plug with wet 
hands as this may cause 
electric shock

 
 
 
 

 

Do not use voltages other than the 
voltage (AC) specified on the 
rating plate, as this may cause fire 
or electric shock

 

If the machines share the same 
outlet with any other electrical 
appliances that consume large 
amounts of power, the voltage 
will fluctuate widely each time 
these appliances operate.  Be 
sure to provide an exclusive 
outlet for the machine as this 
may cause fire or electric 
shock
.

 

Do not place metal objects or 
water-filled containers such as 
flower vases, flower pots or mugs, 
etc. on top of the machines.  If 
metal objects or spilled liquid enter 
the machines, this may cause fire 
or electric shock

 

Do not insert or drop metal, 
flammable or other foreign 
objects into the machines 
through the ventilation slits, as 
this may cause fire or electric 
shock
.

 

 

Do not scratch, damage or modify 
the power cords.  Also, do not 
place heavy objects on, pull on, or 
excessively bend the cords, as this 
may cause fire or electric shock

 

If the machines are dropped or 
their cabinets damaged, first 
turn off the power switches and 
disconnect the power cord 
plugs from the outlet, and then 
contact your authorized 
TOSHIBA TEC representative 
for assistance.  Continued use 
of the machine in that condition 
may cause fire or electric 
shock

 

Continued use of the machines in 
an abnormal condition such as 
when the machines are producing 
smoke or strange smells may cause 
fire or electric shock.  In these 
cases, immediately turn off the 
power switches and disconnect the 
power cord plugs from the outlet.  
Then, contact your authorized 
TOSHIBA TEC representative for 
assistance.   

 

:$51,1*

 

 

 

 

 

$Q\ RWKHU WKDQ WKH
VSHFLILHG $& YROWDJH LV
SURKLELWHG

 

3URKLELWHG

 

3URKLELWHG

 

 

3URKLELWHG

 

3URKLELWHG

 

 

3URKLELWHG

 

'LVFRQQHFW

WKH SOXJ

'LVFRQQHFW

WKH SOXJ

 

 

 

 

 

 

 

Summary of Contents for ST-7000 Series

















Reviews: