SD-R5112 Rev.1.0
DO NOT use this equipment in the system such as medical equipment which may cause personal injury
or property damages resulting from malfunction of this equipment and unexpected data corruption or
data error in reading operation.
4. Turn off the power for this equipment and wait more than one (1) minute before you eject the disc using
the emergency eject mechanism when a disc cannot be ejected for some reasons in order to avoid the
risk of damages to the disc.
Notice
1. Turn off the system power before mounting/removing this equipment in order to avoid the risk of
damages to this equipment.
2. Insert the DC power plug in correct direction in order to avoid the risk of damages to this equipment.
3. Handle this equipment only in electrostatically safe environment and do not touch connecting terminals
with empty hands when you build in or pull out this equipment from other product in order to avoid the
risk of malfunction of this equipment.
4.DO NOT do any of the following:
4.1. DO NOT use storage media (CD's / DVD's) that are not the correct size or shape, or do not meet the
minimum formatting requirements set forth in section 3.1.(1) of this Product Specification.
4.2. DO NOT insert more than one (1) CD or DVD disc into the drive at any time. Doing so will damage or
destroy this equipment and could damage or destroy the disc or cause data loss or corruption.
4.3. DO NOT load or eject any CD or DVD disc with force. Doing so will damage or destroy this equipment
and could damage or destroy the disc or cause data loss or destruction.
4.4. DO NOT eject a CD or DVD disc while the drive is in operation. Doing so will damage or destroy this
equipment and could damage or destroy the disc or cause data loss or corruption.
4.5. DO NOT insert anything else into the drive other than a CD or DVD disc. Doing so will damage or
destroy this equipment.
5. When you close the tray, power must not be turned off. If the tray is pushed in with the hand during
power off, a breakdown may occur because the mechanism in the product is not in the transit
state during power off.
