manualshive.com logo in svg

Toshiba Satellite S300L Series, User Manual

Share
Download
Toshiba Satellite S300L Series User Manual Download Page 39

User’s Manual

2-1

S300L

Chapter 2

The Grand Tour

This chapter identifies the various components of the computer - it is 
recommended that you become familiar with each before you operate the 
computer.

Front with the display closed

The following figure shows the computer’s front with its display panel in the 
closed position.

Figure 2-1 Front of the computer with display panel closed

Legal Footnote (Non-applicable Icons)

*1

For more information regarding Non-applicable Icons, please refer to the 
Legal Footnotes section in Appendix G or click the *1 above.

Please handle your computer carefully to avoid scratching or damaging the 
surface.

System indicators

Microphone

Volume control dial

Headphone jack

Microphone jack

System indicators

These LED indicators allow you to monitor the 
status of various computer functions and are 
described in more detail within the 

System 

indicators

 section.

Summary of Contents for Satellite S300L Series











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands