Toshiba Satellite S300L Series User Manual Download Page 23

Page: 23 / 202

User’s Manual

1-1

S300L

Chapter 1

Getting Started

This chapter provides an equipment checklist, and basic information to start
using your computer.

Equipment checklist

Carefully unpack your computer, taking care to save the box and packaging
materials for future use.

Hardware

Check to make sure you have all the following items:

■

S300L Portable Personal Computer

■

AC adaptor and power cord (2-pin plug or 3-pin plug)

■

Battery pack

Documentation

■

S300L User’s Manual

■

S300L Quickstart

■

Instruction Manual for Safety and Comfort

■

Warranty information

If any of the items are missing or damaged, contact your dealer
immediately.

Some of the features described in this manual may not function properly if
you use an operating system that was not pre-installed by TOSHIBA.

Summary of Contents for Satellite S300L Series











































































































































































































Search results

Summary of Contents for Satellite S300L Series

Reviews:

Brands by name

Popular brands

Toshiba Satellite S300L Series, User Manual

Search results

Summary of Contents for Satellite S300L Series

Reviews:

Brands by name

Popular brands