Toshiba Satellite S300L Series, User Manual

Page: 145 / 202

User’s Manual 8-7
S300L
Real Time Clock
Password
Keyboard
Keyboard problems can be caused by the setup and configuration of the
computer - please refer to Chapter 5,
The Keyboard , for further information.
Problem Procedure
The following
message is Displayed
on the screen:
RTC battery is
low or CMOS
checksum is
inconsistent.
Press [F1] key
to set Date/
Time.
The charge in the Real Time Clock (RTC) battery
has run out - you will need to set the date and
time in the BIOS setup application by using the
following steps:
1. Press the F1 key - the BIOS setup application
will load.
2. Set the date in the System Date field.
3. Set the time in the System Time field.
4. Press the END key - a confirmation message
will be displayed.
5. Press the Y key - the BIOS setup application
will end and the computer will restart.
Problem Procedure
Cannot enter
password Please refer to the TOSHIBA Password Utility
section in Chapter 6, Power and Power-Up
Modes , for further information.
Problem Procedure
Some letter keys
produce numbers Check that the numeric keypad overlay is not
activated - press the
FN + F11 hot key and try
typing again.
Output to screen is
garbled Please refer to your software’s documentation to
ensure that its is not remapping the keyboard in
any way (remapping involves changing or
reassigning the function of each key).
If you are still unable to use the keyboard, you
should contact your reseller, dealer or service
provider.