Toshiba Satellite S300L Series User Manual Download Page 198

Page: 198 / 202

Glossary-14

User’s Manual

S300L

TFT display:

A liquid crystal display (LCD) made from an array of liquid

crystal cells using active-matrix technology with thin film transistor
(TFT) to drive each cell.

Touch Pad:

A pointing device integrated into the TOSHIBA computer palm

rest.

USB:

Universal Serial Bus. This serial interface lets you communicate with

several devices connected in a chain to a single port on the
computer.

VGA:

Video Graphics Array is an industry standard video adaptor that lets

you run any popular software.

volatile memory:

Random access memory (RAM) that stores information

as long as power is supplied to the computer.

warm start:

Restarting or resetting a computer without turning it off.

Wi-Fi:

A registered trademark term of the Wi-Fi Alliance that stands for

Wireless Fidelity, and is another term for the communication
protocol to permit an Ethernet connection using wireless
communication components.

window:

A portion of the screen that can display its own application,

document or dialog box. Often used to mean a Microsoft Windows
window.

Wireless LAN:

Local Area Network (LAN) through wireless

communication.

Wireless WAN:

Wide Area Network (WAN) through wireless

communication.

write protection:

A method for protecting a floppy diskette from accidental

erasure.

Summary of Contents for Satellite S300L Series











































































































































































































Search results

Summary of Contents for Satellite S300L Series

Reviews:

Brands by name

Popular brands

Toshiba Satellite S300L Series, User Manual

Search results

Summary of Contents for Satellite S300L Series

Reviews:

Brands by name

Popular brands