background image

User’s Manual

xi

59(1) of Regulation (EC) No 1907/2006 („REACH“) in a concentration 
above 0.1 % weight by weight.

Following information is only for Turkey:

Compliant with EEE Regulations: TOSHIBA meets all requirements of 
Turkish regulation 26891 “Restriction of the use of certain hazardous 
substances in electrical and electronic equipment”.

The number of possible pixel failures of your display is defined 
according to ISO 13406-2 standards. If the number of pixel failures is 
less than this standard, they will not be counted as defect or failure.

Battery is a consumption product, since the battery time depends on the 
usage of your computer. If the battery can not be charged at all, then it 
is a defect or failure. The changes in battery time is not a defect or 
failure.

Optical disc drive safety instructions

1. Panasonic System Networks

Be sure to check the precautions at the end of this section.

The drive model employs a laser system. To ensure proper use of this 
product, please read this instruction manual carefully and retain for 
future reference. Should the unit ever require maintenance, contact an 
authorized service location.

Use of controls, adjustments or the performance of procedures other 
than those specified may result in hazardous radiation exposure. 

To prevent direct exposure to the laser beam, do not try to open the 
enclosure. 

Summary of Contents for Satellite Pro R840 Series























































































































































































































Reviews: