User’s Manual
4-19
USB Memory BIOS Support Type
This option allows you to set the type of the USB memory to be used as a
startup device.
Panel Open - Power On
This feature allows you to change the
Panel Open - Power On
setting.
Keyboard
Wake-up on Keyboard
When this feature is enabled, and the computer is in Sleep Mode, you can
turn on the system by pressing any key. However, please be aware that this
option will only work with the internal keyboard and only when the computer
is in Sleep Mode.
If a Supervisor Password has been set, manual boot device selection
functions may be restricted.
The boot device selection methods described above will not change the
boot priority settings that have been configured in HW Setup. In addition, if
you press a key other than one of those listed, or if the selected device is
not installed, the system will continue to boot according to the current and
available settings in HW Setup.
HDD
Sets the USB memory to be the equivalent of a
hard disk drive (default). With this setting, the USB
memory device can be used to start the computer
as though it were a hard disk drive based on the
hard disk drive settings within both the Boot
Priority and HDD Priority options detailed
previously.
FDD
Sets the USB memory to be the equivalent of a
floppy diskette drive. With this setting, the USB
memory device can be used to start the computer
as though it were a floppy diskette based on the
floppy diskette drive settings within the Boot
Priority option detailed previously.
Enabled
Enables the
Panel Open - Power On
function.
When you open the display panel while your
computer is turned off, the system will boot up
automatically.
Disabled
Disables the
Panel Open - Power On
function
(Default).
