Toshiba Satellite Pro A150 User Manual Download Page 121

Page: 121 / 224

User’s Manual

5-5

TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150

TOSHIBA Zooming Utility (reduce):

Pressing

reduces the icon

size on the desktop or the font sizes within one of the supported application
windows.

TOSHIBA Zooming Utility (enlarge):

Pressing

enlarges the icon

size on the desktop or the font sizes within one of the supported application
windows.

FN Sticky key

You can use the TOSHIBA Accessibility Utility to make the

key sticky,

that is, you can press it once, release it, and then press an “

F number

” key.

To start the TOSHIBA Accessibility utility, click

Start

All Programs

TOSHIBA

Utilities

Accessibility

Windows special keys

The keyboard provides two keys that have special functions in Windows,
the Windows Start Button key activates the

Start

menu while the

application key has the same function as the secondary (right) mouse
button.

This

key activates the Windows

Start

menu.

This

key has the same function as the secondary (right) mouse button.

Summary of Contents for Satellite Pro A150

































































































































































































































Search results

Summary of Contents for Satellite Pro A150

Reviews:

Related manuals for Satellite Pro A150

Brands by name

Popular brands

Toshiba Satellite Pro A150, User Manual

Search results

Summary of Contents for Satellite Pro A150

Reviews:

Related manuals for Satellite Pro A150

Brands by name

Popular brands