Toshiba Satellite P850 Series User Manual Download Page 40

Page: 40 / 185

Guide

Opens the Television Program Guide to display

available TV channels and programs to watch

and record.

Live TV

A shortcut to the full screen view. It also takes

you to the current point in a live TV program after

pausing live TV.

DVD Menu

Opens the main menu on a DVD movie, if

available.

Red, Green, Yellow

and Blue buttons

It jumps to a registration link.These buttons are

not provided with some models.

Back

Displays the previous window.

More Info

This button has the same function as the

secondary (right) mouse button. Use it to display

more executable options.

Channel/Page up (+)

and down (-)

Changes the TV channel or moves a page up

and down, depending on the available options.

Arrows and OK

Arrows: Moves the cursor to navigate within

Windows Media Center windows.
OK: Selects the desired action or window option.

It acts like the

ENTER

Key.

Mute

Turns your computer sound on/off.

Replay

Moves media backward.

Skip

Moves media forward.

Record

Records the selected television program and

stores it on your hard disk drive.

Pause

Pauses an audio or video track, and live or

recorded TV programs.

Stop

Stops the media currently playing.

Volume Control

Increases or decreases the volume while

watching TV, viewing DVD's or replaying CD's.

Satellite P850/P855 Series

User's Manual

2-13

Summary of Contents for Satellite P850 Series


























































































































































































Search results

Summary of Contents for Satellite P850 Series

Reviews:

Related manuals for Satellite P850 Series

Brands by name

Popular brands

Toshiba Satellite P850 Series, User Manual

Search results

Summary of Contents for Satellite P850 Series

Reviews:

Related manuals for Satellite P850 Series

Brands by name

Popular brands