manualshive.com logo in svg

Toshiba Satellite P200 Series, Maintenance Manual

The Toshiba Satellite P200 Series is a high-performance laptop designed to meet the needs of modern users. With its sleek design and advanced features, this product offers an exceptional user experience. For detailed instructions, the free User Manual can be downloaded from manualshive.com in just a few clicks.

Share
Download
background image

1.6  Batteries 

1  Hardware Overview

 

Satellite P200/P205 Series Maintenance Manual 

[CONFIDENTIAL]

 1-13 

1.6.1 Main Battery 

Battery charging is controlled by a power supply microprocessor that is mounted on the 
system board. The power supply microprocessor controls whether the charge is on or off and 
detects a full charge when the AC adaptor and battery are attached to the computer.  The 
system charges the battery using quick charge or trickle charge. 
 

‰

 

Quick battery charge 

When the AC adaptor is attached, there are two types of quick charge: quick charge 
when the system is powered off and normal charge when the system is powered on.   

The times required for charges are listed in the table below. 

Status Charging 

time 

Normal charge (power on) 

12 hours or longer 

Quick charge (power off) 

About 4 hours or longer 

 

NOTES 

1. 

The time required for normal charge is affected by the amount of power the system 
is consuming. Use of the fluorescent lamp and frequent disk access diverts power 
and lengthens the charge time.

 

2. 

Using quick charge, the power supply microprocessor automatically stops the 
charge after eight hours regardless of the condition of the battery.  Overcharging 
could cause the battery to explode.

 

If any of the following occurs, the battery quick charge process stops.  

1.

 

The battery becomes fully charged.  

2.

 

The AC adaptor or battery is removed.  

3.

 

The battery or output voltage is abnormal.  

4.

 

The battery temperature is abnormal. 

5.

 

The battery SMBus communication fails. 

6.

 

The battery cell is bad. 

‰

 

Detection of full charge 

A full charge is detected from the battery pack through SMBus when the battery is 
charging. 

Summary of Contents for Satellite P200 Series




























































































































































































































































Reviews:

No comments

Related manuals for Satellite P200 Series

Targus Chill Mat Quick Start preview
Chill Mat
Brand: Targus Pages: 4
Targus Chill Mat Quick Start Manual preview
Chill Mat
Brand: Targus Pages: 2
Gateway 450ROG Replacement Instructions Manual preview
450ROG
Brand: Gateway Pages: 12
ASROCK Multi Book G22 User Manual preview
Multi Book G22
Brand: ASROCK Pages: 40
Panasonic CF-VEB274W Operating Instructions preview
CF-VEB274W
Brand: Panasonic Pages: 5
Panasonic CF-VEB342 Operating Instructions Manual preview
CF-VEB342
Brand: Panasonic Pages: 28
Panasonic TOUGHBOOK CF-19KHRJXQV Service Manual preview
TOUGHBOOK CF-19KHRJXQV
Brand: Panasonic Pages: 16
Panasonic CF-VEB341 Operating Instructions Manual preview
CF-VEB341
Brand: Panasonic Pages: 28
Panasonic Toughbook CF-28P3JAZQM User Manual preview
Toughbook CF-28P3JAZQM
Brand: Panasonic Pages: 36
Panasonic Toughbook CF-27EB6GDAM User Manual preview
Toughbook CF-27EB6GDAM
Brand: Panasonic Pages: 36
Panasonic CF-VEB311U Operating Instructions Manual preview
CF-VEB311U
Brand: Panasonic Pages: 44
Panasonic CF-VEB331 Series Operating Instructions Manual preview
CF-VEB331 Series
Brand: Panasonic Pages: 64
Panasonic Toughbook CF-28 Series Reference Manual preview
Toughbook CF-28 Series
Brand: Panasonic Pages: 72
Panasonic Toughbook CF-19KDRAXCM Service Manual preview
Toughbook CF-19KDRAXCM
Brand: Panasonic Pages: 84
Panasonic Toughbook CF-19CHBAXBM Service Manual preview
Toughbook CF-19CHBAXBM
Brand: Panasonic Pages: 84
Panasonic Toughbook CF-18NHHZXBM Service Manual preview
Toughbook CF-18NHHZXBM
Brand: Panasonic Pages: 95
Panasonic Toughbook CF-28 Series Service Manual preview
Toughbook CF-28 Series
Brand: Panasonic Pages: 204
Toshiba Satellite L735-S3370 Specifications preview
Satellite L735-S3370
Brand: Toshiba Pages: 4

Brands by name

Popular brands

Load more brands