manualshive.com logo in svg

Toshiba Satellite P200 Series, Maintenance Manual

The Toshiba Satellite P200 Series is a high-performance laptop designed to meet the needs of modern users. With its sleek design and advanced features, this product offers an exceptional user experience. For detailed instructions, the free User Manual can be downloaded from manualshive.com in just a few clicks.

Share
Download
background image

2 Troubleshooting Procedures 

Satellite P200 / P205 /Satellite Pro P200

 Series Maintenance Manual    

         

[CONFIDENTIAL]  

  

49

 

The Camera board or system board may be the reason of a Camera fault. Either of these two 
components may be damaged. To determine if the computer’s Camera is functioning 
properly, perform the following procedures. Figure 2-18 outlines the process. Start with 
Procedure 1 and continue with the other procedures as instructed. 

Procedure 1:  Diagnostic test 

Procedure 2:  Connector and replacement check 

Procedure 1 

Diagnostic test 

Run the functioning Program in windows, which will display the Camera test result. 

If tests and diagnostics result abnormal go to Procedure 2. If an error is not located, the 
Camera system is functioning properly. 

 

Procedure 2 

Connector and replacement check 

The Camera board or system board may be disconnected or damaged.  Disassemble the 
computer following the steps described in Chapter 4, 

Replacement Procedures

, and perform 

the following checks. 

 

Check 1 

Make sure that the Camera board FPC is securely slotted into the system board. If 
the problem persists, go to Check 2. 

Check 2 

The Camera board may be damaged. Replace it with a new one following the 
instructions in Chapter 4. If the problem still exists, perform Check 3. 

Check 3 

The system board may be damaged.  Replace it with a new one following the 
instructions in Chapter 4. 

 

Summary of Contents for Satellite P200 Series




























































































































































































































































Reviews:

No comments

Related manuals for Satellite P200 Series

Samsung P10 Schematic Diagrams preview
P10
Brand: Samsung Pages: 67
Acer TravelMate 4210 Guía Del Usuario preview
TravelMate 4210
Brand: Acer Pages: 84
IBM MT 2366 Hardware Maintenance Manual preview
MT 2366
Brand: IBM Pages: 168
Clevo 18CL36 User Manual preview
18CL36
Brand: Clevo Pages: 156
Brother GeoBook NB-60 Instructions Manual preview
GeoBook NB-60
Brand: Brother Pages: 258
HP Slate 2 Quickspecs preview
Slate 2
Brand: HP Pages: 17
HP ProBook 6470b Brochure & Specs preview
ProBook 6470b
Brand: HP Pages: 4
HP ProBook 6570b Instruction Manual preview
ProBook 6570b
Brand: HP Pages: 6
HP ProBook 6470b Quickspecs preview
ProBook 6470b
Brand: HP Pages: 46
HP ProBook 6565b Getting Started Manual preview
ProBook 6565b
Brand: HP Pages: 70
HP ProBook 4445s Maintenance And Service Manual preview
ProBook 4445s
Brand: HP Pages: 136
HP ProBook 6565b Maintenance And Service Manual preview
ProBook 6565b
Brand: HP Pages: 138
HP Pavilion TouchSmart 11-e000 Maintenance And Service Manual preview
Pavilion TouchSmart 11-e000
Brand: HP Pages: 85
HP ProBook 4535s Quickspecs preview
ProBook 4535s
Brand: HP Pages: 34
HP Pavilion TouchSmart 11-e000 User Manual preview
Pavilion TouchSmart 11-e000
Brand: HP Pages: 87
HP Pavilion Sleekbook 14-b000 User Manual preview
Pavilion Sleekbook 14-b000
Brand: HP Pages: 85
HP ProBook 4440s Quickspecs preview
ProBook 4440s
Brand: HP Pages: 42
HP Pavilion g7-2100 User Manual preview
Pavilion g7-2100
Brand: HP Pages: 127

Brands by name

Popular brands

Load more brands