Toshiba Satellite P10 SERIES User Manual Download Page 42

Page: 42 / 240

Finding Your Way Around

Front with the display open

5.375 x 8.375 ver 2.3

The

function keys

, when used with the

key, activate

several different system functions. For more information, see

“Hot Keys” on page 199

The

front panel lights

and

system indicator lights

provide

information about various system functions.

The

TouchPad

enables you to move the cursor with the

stroke of a finger.

The

primary and secondary buttons

below the TouchPad

act like the buttons on a mouse, with primary and secondary
functions.

The front panel provides a

palm rest

to assist you in

maintaining proper posture while using the computer.

The

CD/DVD control buttons

let you play audio CDs when

the computer is turned off. You can also use them to play CDs
and DVDs with the computer turned on. For more
information, see

“CD/DVD control buttons” on page 84

The

stereo speakers

let you hear sounds, such as system

alarms associated with your software, and music from DVD-
ROMs and audio CDs.

Front panel lights

The

AC Attached

light glows green when the AC adapter is

attached to the computer.

The

Power on

light glows blue when the computer is on. The

light blinks when the computer is in Standby mode.

Power on light

AC power light

Battery light

CD mode light

Digital mode light

Summary of Contents for Satellite P10 SERIES

















































































































































































































































Search results

Summary of Contents for Satellite P10 SERIES

Reviews:

Related manuals for Satellite P10 SERIES

Brands by name

Popular brands

Toshiba Satellite P10 SERIES, User Manual

Search results

Summary of Contents for Satellite P10 SERIES

Reviews:

Related manuals for Satellite P10 SERIES

Brands by name

Popular brands