manualshive.com logo in svg

Toshiba Satellite P10 SERIES, User Manual

The Toshiba Satellite P10 SERIES user manual is essential for maximizing the potential of your device. Available for free download at manualshive.com, this comprehensive manual provides detailed instructions and valuable insights to ensure you get the most out of your Toshiba Satellite P10.

Share
Download
background image

216

Using ConfigFree™ with your Toshiba Computer

Using Auto Switch

5.375 x 8.375 ver 2.3

❖

From the Profile Settings screen, you can click the 

Auto 

Switch

 button.

Auto Switch (Cable Disconnect)

If a wired network cable is disconnected from the network, 
the Auto Switch (Cable Disconnect) option will 
automatically switch to another network device. 

❖

Enable Wireless when cable disconnect occurs

 — If 

your notebook computer is connected to multiple wired 
LAN devices, and the physical connection to all of these 
devices is disconnected, ConfigFree switches to a 
wireless LAN device. 

However, if the cable connection to only one wired LAN 
device is disconnected, ConfigFree will not switch to a 
wireless device.

Auto Switch (SSID)

The Auto Switch (SSID) option automatically switches to a 
different profile if your notebook computer is connected to a 
wireless LAN network and a network failure occurs.

ConfigFree detects the Service Set Identifier (SSID) of the 
wireless network that you are connected to. If the SSID 
matches the Wireless Network SSID specified in Auto 
Switch, the ConfigFree switches to the corresponding profile.

If your notebook computer is connected to multiple wireless 
LAN devices, the Auto Switch (SSID) feature is disabled. To 
enable this feature, only one wireless LAN device can be used.

NOTE

Summary of Contents for Satellite P10 SERIES

















































































































































































































































Reviews:

No comments

Related manuals for Satellite P10 SERIES

IBM NetVista A22p Kurzübersicht preview
NetVista A22p
Brand: IBM Pages: 78
IBM NetVista A22p Manual D'Utilisation preview
NetVista A22p
Brand: IBM Pages: 90
Gateway Profile 6 User Manual preview
Profile 6
Brand: Gateway Pages: 176
PMC MicroMate -101 User Manual preview
MicroMate -101
Brand: PMC Pages: 126
Commodore PC 10-1 Service Manual preview
PC 10-1
Brand: Commodore Pages: 23
ESTERS ELEKTRONIK GDR 1501 Series Instruction Manual preview
GDR 1501 Series
Brand: ESTERS ELEKTRONIK Pages: 17
Compaq CQ2000 - Desktop PC Manual preview
CQ2000 - Desktop PC
Brand: Compaq Pages: 12
Aaeon BOXER-64 Series Manual preview
BOXER-64 Series
Brand: Aaeon Pages: 90
Acer B6 User Manual preview
B6
Brand: Acer Pages: 28
Neousys Technology Nuvo-6000 Series User Manual preview
Nuvo-6000 Series
Brand: Neousys Technology Pages: 100
Hegener+Glaser Mephisto Polgar Instructions Manual preview
Mephisto Polgar
Brand: Hegener+Glaser Pages: 19
Moxa Technologies MPC-2070 Series Quick Installation Manual preview
MPC-2070 Series
Brand: Moxa Technologies Pages: 10
Moxa Technologies MPC-2101 Series User Manual preview
MPC-2101 Series
Brand: Moxa Technologies Pages: 51
Moxa Technologies DA-681-I-SP-XPE Quick Installation Manual preview
DA-681-I-SP-XPE
Brand: Moxa Technologies Pages: 2
Moxa Technologies DA-710 Series User Manual preview
DA-710 Series
Brand: Moxa Technologies Pages: 73
Moxa Technologies DA-681A Series Quick Installation Manual preview
DA-681A Series
Brand: Moxa Technologies Pages: 7
Tekskil 909C User Manual preview
909C
Brand: Tekskil Pages: 27
JNC DAC Maintenance Manual preview
DAC
Brand: JNC Pages: 60

Brands by name

Popular brands

Load more brands