manualshive.com logo in svg

Toshiba Satellite M500D, User Manual

Share
Download
Toshiba Satellite M500D User Manual Download Page 141

If Something Goes Wrong

Hardware Diagnostic Program

123

Option: 01.Print Ripple pattern

This subtest prints characters for codes 20h through 7Eh line-by-
line while shifting one character to the left at the beginning of each 
new line.

SCSI HDD Test 

TECHNICAL NOTE: If IDE hard disk drives are connected to 
the server, this menu is not available and is grayed out.

To execute the SCSI HDD Test, select 6 from the DIAGNOSTIC 
TEST MENU, press 

Enter

, and follow the directions on the screen. 

The SCSI disk test contains two subtests that test the hard disk 
drive functions.

This test checks the HDD functions for drives connected to the 
SCSI-Bus through ASPI driver software. Before running the tests, 
you must designate the items for testing.

❖

Host ID Number

This option sets the target host adapter number. When you 
choose ALL, the subtest tests all disks connected to the 
server, and the next options, SCSI ID and CHANNEL 
number will be ignored.

❖

SCSI ID NUMBER

This option sets the SCSI ID to test. You can specify just one 
ID to test except ID:7.

❖

CHANNEL NUMBER

If the server has multiple SCSI channels, this option sets the 
channel number to test.

This test only runs if you have hard drives assigned. Use 
appropriate testing for CD-ROMs and tape drives. This program 

00-000.book  Page 123  Tuesday, January 18, 2000  2:56 PM

Summary of Contents for Satellite M500D


































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands