Toshiba Satellite L850D Maintenance Manual Download

Page: 138 / 222

3 Diagnostic Programs 3.11Error Codes and Description

60 Satellite/ Satellite Pro /C850D/C855D/L850D/L855D/L850D/C850D

Maintenance Manual

PCI to ISA Bridge Error PCI-ISA bridge errors.

Repeat multiple times. If there is
always the same error, replace the
board.

ESCD Error

ESCD errors.

As above.

ACPI Table Test Error

Errors with the ACPI table test. As above.

34xx

FAN

Fan Slow Speed Test Fail The fan slow speed test fails.

Check the FAN connection.

Fan Stop Test Fail

The fan stop test fails.

As above.

Fan Fast Speed Test Fail The fan fast speed test fails.

As above.

04xx

Video

Text Attribute Error

Physical problems with the video
card.

Check whether there is any
physical problem with the video
card.

Text Page Selection Error As above.

As above.

Text Color Error

As above.

Text Mode Error

As above.

VGA Mode Error

1) Physical problems with the
video card.
2) Physical problems with the
monitor.

1) Check whether there is any
physical problem with the video
card.
2) Check whether there is any
physical problem with the
monitor.

Character Test Error

Physical problems with the video
card.

Check whether there is any
physical problem with the video
card.

DAC/Palette Address Test
Error

As above.

Color Purity Test Error

Physical problems with the video
card or the monitor.

Check whether there is any
physical problem with the video
card or the monitor.

VESA Mode 15bits Direct
Color Test Error

As above.

VESA Mode 16bits Direct
Color Test Error

As above.

VESA Mode 24bits Direct
Color Test Error

As above.

Get the PCX graphics map
Error

Failure in getting PCX graphics
map.

Check for the PCX graphics map.

Bitblt Engine Test Error

Physical problems with the video
card.

Check and see whether the video
card has any physical problem.

VESA Video Memory
Test Error

As above.

VESA VRAM Test Error

Physical problems with the video
card or the monitor.

Check whether there is any
physical problem with the video
card or the monitor.

Summary of Contents for Satellite L850D































































































































































































































Search results

Summary of Contents for Satellite L850D

Reviews:

Related manuals for Satellite L850D

Brands by name

Popular brands

Toshiba Satellite L850D, Maintenance Manual

Search results

Summary of Contents for Satellite L850D

Reviews:

Related manuals for Satellite L850D

Brands by name

Popular brands