Toshiba Satellite L850D Page 103 Maintenance Manual Download

Page: 103 / 222

3.3 Option

3 Diagnostic Programs

Satellite/ Satellite Pro /C850D/C855D/L850D/L855D/L850D/C850D

Maintenance Manual

If selecting this parameter, errors and time will be recorded only when the test
fails.

Append to Old Log File

If selecting this parameter, the new log will be added to the old one.

Log Device Info on Fail

If selecting this parameter, details of the failed test will be recorded.

•

Log file Name

Specify the Log file name. You can input the detail path of the file. System will
show the detail path of the file.

3.3.7 Specify LOG Viewer

You can specify the Log file viewer in the Specify Log Viewer screen.

The default viewing program of Service Diagnostics is LogView.exe.

3.3.8

Display LOG File

You can specify the Log file for viewing in the Display Error Log File screen.

Summary of Contents for Satellite L850D































































































































































































































Search results

Summary of Contents for Satellite L850D

Reviews:

Related manuals for Satellite L850D

Brands by name

Popular brands

Toshiba Satellite L850D, Maintenance Manual

Search results

Summary of Contents for Satellite L850D

Reviews:

Related manuals for Satellite L850D

Brands by name

Popular brands