Toshiba Satellite L500D Series Maintenance Manual Download | Manualshive

Page: 22 / 246

background image

1 Hardware Overview

Error! Use the Home tab to apply

2 to the text that you want to

appear here. Error! Use the Home tab to apply

2 to the text that you want to appear here.

Satellite L500D Maintenance Manual

1-6

LAN (BTO)

The computer has built-in support for 10M/100M Ethernet LAN (10/100 megabits per
second, 10/100BASE-T). It employs a Realtek 8103EL for 10M/100Mbit LAN. It is pre-
installed as a standard device in some markets.

Wireless LAN (BTO)

Some computers in this series are equipped with a Wireless LAN (WLAN) card. This
WLAN module may come with the following types (depending on the model):

Realtek 802.11 bg (8187SE), bgn (8192E 1x2)

Atheros 802.11 bg (HB95 1x1n), abgn (HB92 2x2), bgn (HB93 2x2)

Internal Modem (BTO)

Some models are equipped with an integrated modem. The integrated modem provides
capability for data and fax communications that support the V.90 (V.92) standards and
includes a modem jack for connection to the telephone line. Please note that both the V.90
and V.92 standards are only supported in the USA, Canada, United Kingdom, France,
Germany and Australia - only the V.90 standard is supported in other regions. You should
also be aware that the speed of data and fax transfer will depend on the analog telephone
line conditions. The integrated model is only installed as a standard device in some markets.
This internal modem comes with MDC 1.5 solution (Azalia interface) and is exclusive with
FM Turner.

Bluetooth (BTO)

Some computers in this series offer Bluetooth wireless communication functionality which
eliminates the need for cables between electronic devices such as computers and printers.
When implemented, Bluetooth provides wireless communication in a small space. This
module is Version 2.1 + EDR (Antenna on Module type) with dual stack support (Toshiba
and Microsoft).

PCMCIA Card Organization

One type II card socket with shutter door (PC Card or CardBus slot).

O2 Micro OZ601 controller

PC card 95 supported

No ZV-port support

SRAM, OTPROM, FLASH ROM, mask ROM memory card up to 64MB

«
...
20
21
22
23
24
...
»

Summary of Contents for Satellite L500D Series























































































































































































































































Reviews:

No comments

Related manuals for Satellite L500D Series

Toughbook CF-18BCAGCMM

Brand: Panasonic Pages: 52

Brand: Zenith Pages: 147

Brand: Acer Pages: 80

TravelMate 4400

Brand: Acer Pages: 63

Brand: Acer Pages: 82

Brand: Acer Pages: 82

TravelMate 4400

Brand: Acer Pages: 63

Brand: Gateway Pages: 78

Brand: Fujitsu Pages: 18

T4310 - LifeBook Tablet PC

Brand: Fujitsu Pages: 2

Brand: Dell Pages: 23

Inspiron 15 5000 Series

Brand: Dell Pages: 27

Inspiron 15 7000 Series

Brand: Dell Pages: 57

Inspiron 15 5515

Brand: Dell Pages: 21

Brand: Gateway Pages: 156

Brand: Sony Pages: 2

VGN-FE680G - VAIO - Core Duo 1.83 GHz

Brand: Sony Pages: 2

VGN-CS160J - VAIO CS Series

Brand: Sony Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands