Toshiba Satellite L500D Series Maintenance Manual Download

Page: 142 / 246

4 Replacement Procedures

Error! Use the Home tab to apply

2 to the text that you want to

appear here. Error! Use the Home tab to apply

2 to the text that you want to appear here.

Satellite L500D Maintenance Manual

4-14

4.4

Memory

Removing the Optional Memory

Remove the optional memory according to the following procedures and Figure 4.4 and 4.5 after
checking that the laptop is turned off.

CAUTION:

Remove the optional memory after turning off the laptop. If this is violated, the

laptop or memory can be damaged.

1. Turn the laptop upside down.

2. Remove one M2.5Dx2 screw that secures the RAM door.

3. Remove the RAM door.

CAUTION:

Do not touch the connectors on the memory or in the laptop. Contaminated

connectors can cause memory access problems.

Figure 4.4 Removing the RAM door

M2.5Dx2*1

Summary of Contents for Satellite L500D Series























































































































































































































































Search results

Summary of Contents for Satellite L500D Series

Reviews:

Related manuals for Satellite L500D Series

Brands by name

Popular brands

Toshiba Satellite L500D Series, Maintenance Manual

Search results

Summary of Contents for Satellite L500D Series

Reviews:

Related manuals for Satellite L500D Series

Brands by name

Popular brands