Toshiba Satellite L500D Series Maintenance Manual Download

Page: 191 / 246

Error! Use the Home tab to apply

2 to the text that you want to appear here. Error! Use the

Home tab to apply

2 to the text that you want to appear here.

4 Replacement Procedures

Satellite L500D Maintenance Manual

4-63

4.22

Bluetooth Card

Removing the Bluetooth card

Remove the Bluetooth card according to the following procedures and Figure 4.47.

1. Remove the Bluetooth cable from the Bluetooth card.

2. Press down the latch and push the Bluetooth card in the direction indicated in the figure

4.47 and slide the Bluetooth card out.

3. Remove the card from the logic lower assembly.

Figure 4.47 Removing the Bluetooth card

NOTE:

Be careful not to damage the Bluetooth Card when connecting it with the cable. Make

sure the card is seated in the correct position.

Summary of Contents for Satellite L500D Series























































































































































































































































Search results

Summary of Contents for Satellite L500D Series

Reviews:

Related manuals for Satellite L500D Series

Brands by name

Popular brands

Toshiba Satellite L500D Series, Maintenance Manual

Search results

Summary of Contents for Satellite L500D Series

Reviews:

Related manuals for Satellite L500D Series

Brands by name

Popular brands