manualshive.com logo in svg

Toshiba Satellite L40, User Manual

The Toshiba Satellite L40 User Manual is a comprehensive guide that provides step-by-step instructions and detailed information about the product. Easily download this manual for free from manualshive.com, ensuring you have all the necessary knowledge to maximize your experience with the Toshiba Satellite L40.

Share
Download
background image

85

Learning the Basics

Using the keyboard

Overlay keys 

The keys with gray numbers and symbols on the front of them form 
the numeric and cursor overlay. This overlay lets you enter numeric 
data or control the cursor as you would using the 10-key keypad on 
a desktop computer’s keyboard.

(Sample Illustration) Numeric and cursor control overlay

Using the overlay to type numeric data

The keys with the numbers on their right front are the numeric 
overlay keys. 

To turn the numeric overlay on, press 

Fn

 and 

F11 

simultaneously. 

The numeric mode light on the keyboard indicator panel glows 
when the numeric overlay is on.

To disable the numeric overlay, hold down the 

Fn

 key and press 

F11

 

again. The numeric mode light on the keyboard indicator panel 
goes out.

Summary of Contents for Satellite L40













































































































































































































Reviews:

No comments

Related manuals for Satellite L40

Panasonic Toughbook CF-Y5LWEZABM Reference Manual preview
Toughbook CF-Y5LWEZABM
Brand: Panasonic Pages: 106
YAKUMO NOTEBOOK Q7M ENTERTAINMENT XD Manual preview
NOTEBOOK Q7M ENTERTAINMENT XD
Brand: YAKUMO Pages: 41
Acer Aspire M3-581T Service Manual preview
Aspire M3-581T
Brand: Acer Pages: 234
Acer ExtensaTM 670 User Manual preview
ExtensaTM 670
Brand: Acer Pages: 107
Acer Extensa 2900E Manual preview
Extensa 2900E
Brand: Acer Pages: 62
Dell 1526 - Inspiron - Laptop Service Manual preview
1526 - Inspiron - Laptop
Brand: Dell Pages: 51
Dell 1720 - Vostro - Core 2 Duo 2.2 GHz Service Manual preview
1720 - Vostro - Core 2 Duo 2.2 GHz
Brand: Dell Pages: 66
Dell 1737 - Studio - Laptop Service Manual preview
1737 - Studio - Laptop
Brand: Dell Pages: 47
Fujitsu 985Tx User Manual preview
985Tx
Brand: Fujitsu Pages: 185
Intel Compaq nc6400 Quickspecs preview
Compaq nc6400
Brand: Intel Pages: 41
Durabook SA14iT User Manual preview
SA14iT
Brand: Durabook Pages: 43
VTech Challenger Laptop User Manual preview
Challenger Laptop
Brand: VTech Pages: 1
VTech My Zone User Manual preview
My Zone
Brand: VTech Pages: 18
VTech Xtra Pro User Manual preview
Xtra Pro
Brand: VTech Pages: 24
VTech Nitro Jams Notebook User Manual preview
Nitro Jams Notebook
Brand: VTech Pages: 19
VTech SilverStreak User Manual preview
SilverStreak
Brand: VTech Pages: 43
Eluktronics THICC-15 Concise User Manual preview
THICC-15
Brand: Eluktronics Pages: 134
Getac B360 User Manual preview
B360
Brand: Getac Pages: 111

Brands by name

Popular brands

Load more brands