Toshiba Satellite L40 User Manual Download

Page: 64 / 204

Getting Started

Using the TouchPad™

Checking the HDD operating status

After restoring your hard disk drive, you can check its status as
follows:

Click

Start

Right-click

Computer

Select

Manage

Click

Disk Management

Highlight the hard disk drive in the Volume list to display its
status in the lower portion of the screen.

Installing drivers and applications

(Available on certain models)

The TOSHIBA Application Installer

(

available on certain models

)

allows you to reinstall the drivers and applications that were
originally bundled with your computer.

To reinstall drivers and applications:

Double-click the

TOSHIBA Application Installer

icon on the

Windows

desktop.

Click

Next

Click the item(s) you want to install.

Click

Install

Follow the on-screen prompts to complete the installation process.

Using the TouchPad

™

The TouchPad

™

, the small, smooth, square cutout located in front of

the keyboard, is sensitive to touch and enables you to move the
cursor with the stroke of a finger. Simply move your finger on the
TouchPad in the direction you would like to move the cursor:

❖

To move the cursor to the top of the page, push your finger
forward on the TouchPad.

❖

To move the cursor to the bottom of the page, drag your finger
toward yourself.

❖

To move the cursor to the right side of the page, slide your
finger across the TouchPad from left to right.

❖

To move it to the left side, slide your finger from right to left.

Summary of Contents for Satellite L40













































































































































































































Search results

Summary of Contents for Satellite L40

Reviews:

Related manuals for Satellite L40

Brands by name

Popular brands

Toshiba Satellite L40, User Manual

Search results

Summary of Contents for Satellite L40

Reviews:

Related manuals for Satellite L40

Brands by name

Popular brands