Toshiba Satellite L20 Maintenance Manual Download Page 133

Page: 133 / 264

Test Program for Field.

Satellite L20 Maintenance Manual(960-Q01)

133

3.16 Running Test

NOTES:

You may add or delete subtests using the Running Test Edit Item function, see Section
3.20.

Do not forget to insert a work disk in the FDD. If a work disk is not inserted an error
will be generated during the Floppy Disk Test.

If the test completes successfully an “PASS” sign with blue letters displays on the
screen.

If the test fails or is interrupted before completion an “FAIL” sign with red letters
displays on the screen.

If running item not select an “NOITEM” sign with green letters display on the screen.

All errors which occur during execution of the Running Test are logged in the Log
File.

This program is executed according to the

Count Loop

number selected in the

Running Test Edit Item, see Section 3.20. To terminate the program, press Ctrl +
Break.

Summary of Contents for Satellite L20









































































































































































































































































Search results

Summary of Contents for Satellite L20

Reviews:

Related manuals for Satellite L20

Brands by name

Popular brands

Toshiba Satellite L20, Maintenance Manual

Search results

Summary of Contents for Satellite L20

Reviews:

Related manuals for Satellite L20

Brands by name

Popular brands