Toshiba Satellite L20 Maintenance Manual Download Page 142

Page: 142 / 264

Test Program for Field.

142

Satellite L20 Maintenance Manual(960-Q01)

Pass Count

Displays the number of times the test has been executed.

Error Count

Displays the number of errors which have occurred during the test.

Write Data

Displays only the test data that has failed to compare during the

test while being written during the test.

Read Data

Displays test data that has failed to compare during the test while

being read during the test.

Test Address

Displays the Test Address. (The format differs for each test.)

Error Status

Displays the error status.

Error Name

Displays the name of the error.

Summary of Contents for Satellite L20









































































































































































































































































Search results

Summary of Contents for Satellite L20

Reviews:

Related manuals for Satellite L20

Brands by name

Popular brands

Toshiba Satellite L20, Maintenance Manual

Search results

Summary of Contents for Satellite L20

Reviews:

Related manuals for Satellite L20

Brands by name

Popular brands