Toshiba Satellite 5200 Series, User Manual

Page: 149 / 264

7-5
HW S
ETUP
AND
P
ASSWORDS
To create a Key FD follow the steps below.
1. Turn off the computer’s power.
2. Connect the diskette drive to a USB port on the computer.
3. Set a diskette’s write-protect tab to the write enable position and insert the
diskette in the drive.
NOTE: All data on the diskette will be destroyed.
4. Turn on the computer’s power.
Password=
will be displayed on the Sub LCD.
5. Enter the password.
6. Press the Tab key.
Insert FD Ready (Y/N)
will be displayed on the Sub LCD.
7. Press Y.
Remove FD press key
will be displayed on the Sub LCD.
8. Remove the diskette and press any key.
CPU
This function lets you set the CPU operating mode.
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
Dynamically Switchable
CPU power consumption and clock speed
automatic switching function is enabled.
When the computer is in use, CPU operation
is automatically switched when necessary.
(Default)
Always High
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at its fastest speed.
Always Low
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at low power consumption
and low speed.
HW Setup