Toshiba Satellite 1130 Series, User Manual

Page: 98 / 188

Power and Power-Up Modes
Satellite 1130 Series 6-3
Satellite 1130 Series
Version
1
Last Saved on 05/02/2003 17:53
ENGLISH using Euro_M.dot –– Printed on 05/02/2003 as IM_113EN
DC IN indicator
Check the DC IN indicator to determine the power status from the
AC adaptor connected:
Green Indicates the AC adaptor is connected and
supplying proper power to the computer.
No light Indicates the AC adaptor is not connected.
Power indicator
Check the Power indicator to determine the power status with the
AC adaptor connected:
Green Indicates power is being supplied to the
computer and the computer is turned on.
Blinking amber
Indicates power is being supplied to the
computer while the computer is in Standby
mode. The indicator blinks on for one second
and off for two seconds.
No light Under any other conditions, the indicator does
not light.
Battery types
The computer has two types of batteries:
Battery pack
Real Time Clock (RTC) battery
Battery pack
When the AC adaptor is not connected, the computer’s main power
source is a removable lithium ion (Li-Ion) battery pack, also referred to in
this manual as the battery. You can purchase additional battery packs for
extended use of the computer away from an AC power source.
The battery is a disposable item. When its operation becomes short even
when fully charged, replace it with a new one.
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.
Do not remove the Battery Pack while the computer is in Standby mode.
Data is stored in RAM, so if the computer loses power, it will be lost.