1-2. PC Board Replacement
1-2-1. Digital PC Board
1. Peel off the tape (1).
2. Disconnect three flexible cables (2) and two connectors (3).
3. Remove four screws (4), then remove the Digital PC board (5).
Note:
• The Digital PC board (5) is connected to the Mother PC board (6) by a connector (7). Take notice when removing.
• After replacing, attach the tape (1) to its original position.
Fig. 2-1-7
1-2-2. Tuner Unit PC Board
1. Peel off the tape (1).
2. Remove the screw (2) and the screw (3).
3. Disconnect the flexible cable (4).
4. Remove the screw (5) , then remove
the Tuner Unit PC board (6).
Note:
• After replacing, attach the tape (1) to its original position.
Fig. 2-1-8
