1-2-6. Power PC Board
Cautions :
• Danger of explosion if battery is incorrectly replaced.
• Replace only with the same or equivalent type.
1. Remove the LAN PC board. (Refer to item 1-2-4.)
2. Remove the Clamp (1)
3. Disconnect three connectors (2) and the connector (3).
4. Remove the screws (4) and four screw (5).
5. Remove the Power PC board (6).
Fig. 2-1-12
1-2-7. Front (R), Front (L/SW), Front (Jack) PC Boards
1. Remove the front panel. (Refer to item 1-1-3.)
2. Remove four screws (1), then remove the stay (2).
4. Remove five screws (3), then remove the Front (R) PC board (4).
5. Remove two screws (5), then remove the Front (Jack) PC board (6).
6. Remove three screws (7), then remove the Front (L/SW) PC board (8).
Fig. 2-1-13
