Toshiba RD-KX50SU, Service Manual

Page: 24 / 52

Power requirement during operation
Power requirement at standby
Power supply
Mass
External dimension
Incoming channels
Antenna input/output terminal
Signal system
Laser
Format
Image recording system
Sound recording system
Internal hard disk
VIDEO input
VIDEO output
S-VIDEO input
S-VIDEO output
COMPONENT output (Y, P
B
, P
R
)
AUDIO input
AUDIO output
DIGITAL AUDIO OUTPUT BITSTREAM/PCM
(OPTICAL terminal)
CHANNEL CHANGE IR jack
HDMI output
DV input
Remote control
Operating conditions
Clock display
Clock accuracy
37W
3.0W or below (Eco mode: off)
0.8W or below (Eco mode: on)
120V AC, 60 Hz
5.0kg
Width 430 x Height 78 x Depth 339mm
TV : 2-69CH, Cable : 1-125CH
VHF/UHF : 75
W
, F Connector
Standard NTSC Color TV system
Semiconductor laser, Wavelength : 650nm/780nm
DVD-Video format
MPEG2
Dolby Digital M1, M2, Linear PCM
RD-XS52SU/RD-XS52SC:160 GB
RD-KX50SU: 80 GB
1.0Vp-p (75
W
), Sync signal negative, Pin jack x 3 systems, 2 at rear, 1 in front
1.0Vp-p (75
W
), Sync signal negative, Pin jack x 1 systems, 1 at rear
(Y) 1.0Vp-p (75
W
), Sync signal negative, Mini DIN4 Pin x 3 systems
(C) 0.286Vp-p (75
W
), 2 at rear, 1 in front
(Y) 1.0Vp-p (75
W
), Sync signal negative, Mini DIN4 Pin x 1 systems
(C) 0.286Vp-p (75
W
), 1 at rear
Y output (green), 1.0Vp-p (75
W
), Sync signal negative, Pin jack x 1 system
P
B
, P
R
output (blue, red), 0.7Vp-p (75
W
), Pin jack x 1 systems each
2.0V (rms), 50k
W
or below, pin jack (L, R) x 3 systems
2 at rear, 1 in front
2.0V (rms), 200
W
or above, pin jack (L, R) x 1 systems
1 at rear
Optical connector x 1 system
This is for connection of the supplied IR control cable only.
This is for connection of a HDMI cable.
4-Pin x 1 in front
Wireless remote control (SE-R0161)
Temperature: 41
°
F~95
°
F (5
°
C~35
°
C),
Position: Horizontal
12 hour digital display
Quartz (monthly deviation: approximately
±
30 seconds)
SPECIFICATIONS
• The design and specifications may change without prior notice.
• The Illustrations and screens described in this manual may be exaggerated or simplified for easy recognition and may be slightly different from the actual unit.