1-2-2. Digital PC Board
1. Remove the top cover. (Refer to item 1-1-1.)
2. Remove the Digital Tuner Module. (Refer to item 1-2-1.)
3. Remove the tape (1).
4. Disconnect the two flexible cables (2).
5. Disconnect the connector (3).
6. Remove three screws (4), then remove the Digital PC board (5).
Note:
• Be careful when removing the Digital PC board as it is connected to the Mother PC board (6) with the three connectors
(7).
Fig. 2-1-8
Screws (4)
Digital PC board (5)
Flexible cables (2)
Mother PC board (6)
Connector (3)
Connector (7)
Connector
Claw
Flexible
cable (2)
Tape (1)
Connector
Claw
Flexible
cable (2)
