1-1-5. Rear Panel
1. Remove the top cover. (Refer to item 1-1-1.)
2. Remove the Tuner Unit PC Board. (Refer to item 1-2-1.)
3. Remove eight screws (1), then remove the rear panel (2).
4. Remove two claws, then remove the rear panel (2).
5. Remove the tape (3).
6. Remove two screws (4), then remove the fan (5).
7. Remove two screws (6), then remove the coaxial cable (7).
Fig. 2-1-5
1-1-6. Fan
1. Remove the top cover. (Refer to item 1-1-1.)
2. Disconnect the connector (1).
3. Remove the tape (2).
4. Remove two screws (3), then remove the fan (4).
Screw (1)
Screw (1)
Screw (6)
Screws (4)
Screws (1)
Fan (5)
Tape (3)
Coaxial cable (7)
Rear panel (2)
Claw
Claw
Screws (3)
Hexagonal nuts
Fan (4)
Connector (1)
Tape (2)
Fig. 2-1-6
