1-1-2. HDD
1. Remove the top cover. (Refer to item 1-1-1.)
2. Remove the tape (1).
3. Remove four screws (2).
4. Disconnect the flexible cable (3) and the connector (4).
5. Remove four screws (5), then remove the damper (7) and HDD (8) from the bracket (6).
Note:
• Attach the tapes (1) as they were after the HDD is replaced.
Fig. 2-1-2
Connector (4)
Screws (5)
Screws (5)
Bracket (6)
Damper (7)
HDD (8)
Flexible
cable (3)
Damper (7)
Screws (2)
Tape (1)
Connector
Claw
Flexible
cable (3)
Damper (7)
Damper (7)
