Toshiba RBC-AMT31-E, Owner'S Manual

Page: 10 / 15

7
How to set up the air direction
Push
SWING/FIX
button.
1
Every pushing the button, the air direction changes.
In Heating operation
Set the air outlet flap downward.
If directing it upward, the hot air may not come to the foot.
In Cooling / Dry operation
Set the air outlet flap upward.
If directing it downward, the dew may fall on near the air discharge port or it drips.
How to start swinging
2
Push
SWING/FIX
button.
Set direction of the air outlet flap to the
lowest position and then push
SWING/FIX
button
again.
• [SWING
] is displayed and the air direction
automatically changes upward/downward.
In case when one remote controller controls
the multiple indoor units, each indoor unit can
be selected and its air direction can be set up.
How to stop swinging
3
Push
SWING/FIX
button again during swinging of
the air outlet flap.
• The air outlet flap can be stopped at the
desired position. After then the air direction
can be again set up from the uppermost
position by pushing SWING/FIX button.
* While the air outlet flap is set downward in
cooling/drying operation, it does not stop.
If stopping the air outlet flap which directs
downward during swinging, it stops after
moving to the 3rd position from the top
position.
4
UNIT
• To set up the air direction individually, push
UNIT
button to display each indoor unit No. in
a group control. Then set up the air direction to
a displayed indoor unit.
• If there is no display, all the indoor units can be
operated collectively.
• Every pushing
UNIT
button, the display
exchanges as shown in the figure.
Initial setup
Initial setup
In FAN operation
1, 2, 3 4
In all modes
Display when stopping the swing
Initial setup
Series of
operation
Fan/Heat
operation Cool/Dry
operation
ON / OFF
FAN
TEMP.
SWING/FIX TIME
MODE
VENT
UNIT SET CL
FILTER
RESET TEST
TIMER SET
Unit No. 1-1 No display Unit No. 1-2
Unit No. 1-4 Unit No. 1-3