Toshiba RAV-SM562KRT-E, Installation Manual

Page: 18 / 180

EN
9
TROUBLESHOOTING
15
8
TEST RUN
Incase of wired remote controller
Indoor unit No. in which
an error occurred Check code
In case of wired remote controller
Procedure Description
Keep
TEST
button pushed for 4 seconds or more.
[TEST] is displayed on the display part and the selection of mode in the test mode is
permitted.
Push
ON / OFF
button.
Using
MODE
button, select the operation mode, [COOL] or [HEAT].
•
Do not run the air conditioner in a mode other than [COOL] or [HEAT].
•
The temperature controlling function does not work during test operation.
•
The detection of error is performed as usual.
After the test operation, push
ON / OFF
button to stop the operation.
(Display part is same as procedure
1
.)
Push
TEST
button to cancel (release from) the test operation mode.
([TEST] disappears on the display part and the status returns to a normal
stop status.)
1
2
3
4
5
Confirmation and check
When a trouble occurred in the air conditioner, the
check code and the indoor unit No. appear on the
display part of the remote controller.
The check code is only displayed during the operation.
If the display disappears, operate the air conditioner
according to the following “Confirmation of error history”
for confirmation.
ON / OFF
FAN
TEMP.
SWING/FIX TIME
MODE
VENT
UNIT SET CL
FILTER
RESET TEST
TIMER SET
2
,
4
3
1
,
5
TEST
CODE No.
UNIT No.
R.C. No.