- 44 -
NO.
ITEM
OUTLINE OF SPECIFICATIONS
REMARKS
Up to 16 units can be controlled in same setting condition by one remote controller.
However, thermo-control function is independent.
Respective delayed start time for preventing simultaneous large starting current
can be by different setting of the unit No. switch on the indoor PC board.
Refer to P. 34
See other item:
Using [TIME]
display
Fault diagnosis is carried out by check for serial signal transmission and reception
with outdoor unit as well as the self check by indoor microcomputer.
And check code is transmitted to protective operation/remote controller based on
the contents of it.
In the remote controller, check code is displayed on the liquid crystal by pressing
[CHECK] key.
Check display
5
7
Group operation
control
(*) After switching on the power, the compressor will start after a minimum period of 30 secs.
The outdoor unit delays restarting for 2.5 min. to prevent short cyclic compressor
operation. (*)
Anti-restart timer
6
Unit No.
Check
code
Heronhill - for all your Toshiba requirements
Tel: 01823 665660
www.heronhill.co.uk
Fax: 01823 665807
